Post general discussions on using our drivers to write your own software here
- Posts: 0
- Joined: Fri Nov 18, 2022 5:03 am
I am working on pico5444B with python. I can only set the voltage to some range like "PS5000A_20V". I want to know how to set this voltage range to auto mode.
here are some of my code
channel = ps.PS5000A_CHANNEL["PS5000A_CHANNEL_C"]
chCRange = ps.PS5000A_RANGE["PS5000A_2V"]
status["setChC"] = ps.ps5000aSetChannel(chandle, channel, 1, coupling_type, chCRange, 0)
- Site Admin
- Posts: 4277
- Joined: Fri Jun 10, 2011 8:15 am
- Location: St. Neots
The Auto mode in the PicoScope software is manually performed within the software itself, there is no actual auto mode on the device. You can perform the same type of approach by looking at the returned ADC counts and then making a decision as to whether you need to go up or down a range, or stay at the current setting.
Technical Support Manager