Data missing when decoding SPI bus

Post any questions related to the new PicoScope 7 software
Post Reply
grosen
Newbie
Posts: 0
Joined: Sat Nov 05, 2022 8:48 pm

Data missing when decoding SPI bus

Post by grosen »

Hi
I am using a 3405D and Picoscope 7 Early Access version 7.0.111.12850 on a MAC to decode an SPI bus (SPI SDIO). The packet is always seven bytes, and they are always detected in the signal view, but in the table only four or five bytes will show up, se attached screen dump. Am I missing something, or is this a bug?
Attachments
Screendump.jpg

bennog
Advanced User
Advanced User
Posts: 206
Joined: Mon Nov 26, 2012 9:16 am
Location: Netherlands

Re: Data missing when decoding SPI bus

Post by bennog »

do you have a .psdata file ?

and what about PS6 (don't know if this is for the mac)

Benno

sbabic44
User
User
Posts: 3
Joined: Thu Nov 30, 2017 10:17 pm

Re: Data missing when decoding SPI bus

Post by sbabic44 »

Try resizing Data column width..

Post Reply