Forum for discussing PicoScope version 6 (non-automotive version)
- Posts: 0
- Joined: Wed Sep 07, 2022 7:08 pm
Perhaps not already a feature in DeepMeasure, but it would be useful to be able to specify time point(s) within a periodic waveform cycle (using the sliding time bar) at which the signal amplitude would be captured and subsequently logged for .csv export. I would like to do statistics on our detector integrator output for each laser pulse and this feature would let me easily specify where in the acquisition cycle to capture and log the amplitude. An associated time stamp, or ns into the cycle, would also be useful. If there is already another method to achieve the same results, would welcome the feedback.