DeepMeasure-amplitude capture at specified times within cycle

Forum for discussing PicoScope version 6 (non-automotive version)
Post Reply
plmohan
Newbie
Posts: 0
Joined: Wed Sep 07, 2022 7:08 pm

DeepMeasure-amplitude capture at specified times within cycle

Post by plmohan »

Perhaps not already a feature in DeepMeasure, but it would be useful to be able to specify time point(s) within a periodic waveform cycle (using the sliding time bar) at which the signal amplitude would be captured and subsequently logged for .csv export. I would like to do statistics on our detector integrator output for each laser pulse and this feature would let me easily specify where in the acquisition cycle to capture and log the amplitude. An associated time stamp, or ns into the cycle, would also be useful. If there is already another method to achieve the same results, would welcome the feedback.
Cheers.

Post Reply