Running 2 Picologgers simultaneously in Labview

Post your LabVIEW discussions here
Post Reply
sherzaad
Newbie
Posts: 0
Joined: Tue Jun 06, 2017 3:43 pm

Running 2 Picologgers simultaneously in Labview

Post by sherzaad »

Hello,

I have seen the sample VI for runnnig Picolog.

If I have 2 picologgers (1012 and 1216) and wish to using both of them within LabVIEW (ie 28 ch in total) how do I tell labVIEW to connect to both units?

Kindly advise
Top
sherzaad
Newbie
Posts: 0
Joined: Tue Jun 06, 2017 3:43 pm

Re: Running 2 Picologgers simultaneously in Labview

Post by sherzaad »

any suggestions?
Top
Martyn
Site Admin
Site Admin
Posts: 4499
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Running 2 Picologgers simultaneously in Labview

Post by Martyn »

You will need to duplicate calls to all the functions that control the logger and specificallywhen opening the unit as each one will have it's own handle. There is a multi unit version for the USBTC08 which may help to point you in the right direction https://github.com/picotech/picosdk-ni- ... er/usbtc08
Martyn
Technical Support Manager
Top
sherzaad
Newbie
Posts: 0
Joined: Tue Jun 06, 2017 3:43 pm

Re: Running 2 Picologgers simultaneously in Labview

Post by sherzaad »

Thank you for pointing me in the right direction! :)
Top
Post Reply

Return to “LabVIEW”