Labview PicoVNA error after installing picoVNA3

Post your LabVIEW discussions here
Post Reply
Rednecknerd
Newbie
Posts: 0
Joined: Mon Apr 28, 2014 7:48 pm

Labview PicoVNA error after installing picoVNA3

Post by Rednecknerd »

Was using the Pico VNA S-parameter Example just fine with PicoVNA2 installed.

After installing PicoVNA3 my code and the example code started giving errors.

Invoke Node: Invalid method
Invoke Node: Invalid refnum class

Windows 10
Labview 2014

AndrewA
PICO STAFF
PICO STAFF
Posts: 400
Joined: Tue Oct 21, 2014 3:07 pm

Re: Labview PicoVNA error after installing picoVNA3

Post by AndrewA »

Hi,
Are still having this issue?
Which model VNA do you have 106 or 108?
What version LabVIEW are you using? 32-bit or 64-bit?
Do you know which "Invoke Node" function is generating the error?
Regards Andrew
Technical Specialist

OctopusPrime
Newbie
Posts: 0
Joined: Fri Sep 16, 2022 12:53 pm

Re: Labview PicoVNA error after installing picoVNA3

Post by OctopusPrime »

Hello, can I jump into the discussion?

I have a PicoVNA 108 which is correctly recognized and working with the PicoVNA3 software.
I need to use LabVIEW, but it's not able to communicate with it... please see the attached screenshots.

I see there is a "picocontrol2._PicoVNA_2" control. Maybe it was compatible only with the PicoVNA2 version? just guessing, I have never used the previous version.

Thank you very much!
Attachments
PicoVNA 108 not working in LabVIEW.PNG
PicoVNA 108 correctly recognized.PNG
LabVIEW probe Display.PNG

AndrewA
PICO STAFF
PICO STAFF
Posts: 400
Joined: Tue Oct 21, 2014 3:07 pm

Re: Labview PicoVNA error after installing picoVNA3

Post by AndrewA »

FYI-
We are working to resolve this issue directly with the customer.
We will post updated examples to https://github.com/picotech/picosdk-pic ... w-examples once the issue is fully resolved.
In the meantime if anyone has the same issue please email support@picotech.com
Regards Andrew
Technical Specialist

Post Reply