Streaming mode example - Picoscope 2208B

Post your MATLAB discussions here
Post Reply
RAbdy
Newbie
Posts: 0
Joined: Mon Jul 04, 2022 11:04 am

Streaming mode example - Picoscope 2208B

Post by RAbdy »

Hello,

I seem to be experiancing an issue when using the example streaming code in the picosdk examples listing. When running the code the data in from Buffer channel A seems to get stuck in a loop when on continous streaming. For example, I am running the data through an fft to visulaise the data, when the target is moved or the source turned off the code appears to continue sending the original few ms of data in a continuos loop. Almost as if new data from the buffer isn't replaceing old data. I have tried this with two picoscopes and the output is the same. Has anyone experiances a similar issue or know of a fix?

I have added an image of the fft, it is in the same location as the example code's graphs so should work the same way (these also seemed to have the same issue as above).

Cheers.
Attachments
The added fft code, in the same location as example code graphs.
The added fft code, in the same location as example code graphs.

Post Reply