Channel Enable/Clear keyboard short cut does not restore range

Forum for discussing PicoScope version 6 (non-automotive version)
Post Reply
mike603
Newbie
Posts: 1
Joined: Thu Dec 22, 2016 3:56 pm

Channel Enable/Clear keyboard short cut does not restore range

Post by mike603 »

If I assign Channel A Enable to ALT-1 and Channel A Clear to ALT-2.

With the voltage range set to 20. When I press ALT-2 Trace A goes away but when I press ALT-2 Trace A comes back on but at Auto voltage rather than 20V.

How can I have the Enable just turn the trace on without changing it's Voltage Range setting.

Post Reply