CPU Load [Mac]

Post any questions related to the new PicoScope 7 software
Post Reply
Stefan2
Newbie
Posts: 0
Joined: Sun Mar 27, 2022 11:43 am

CPU Load [Mac]

Post by Stefan2 »

Hello to everyone,

I'm using PicoScope 7 on a 2018 Mac mini, Intel 6-core i7 with 32 GB RAM. My scope is a 5444D MSO
The CPU load of PicoScope when just 1 channel is active ranges between 40-150 % and the waveform seems sluggish. When the probe is removed from a signal, it seems to take 0,5-1s until the waveform flats out also on the screen.

PicoScope does use DMA & GPU acceleration, right?

Regards
Stefan

Post Reply