PicoScope 7 Software
Available on Windows, Mac and Linux
Probes for I2C
Probes for I2C
Picoscope 2204A with latest non-beta software on windows 10;
What probes can I use to monitor I2C at 100kHz? I have AUTOUTLET P6100 which came in a bundle with the 2204A from Amazon UK but they affect the clock line and stop the I2C working. Or is there a way to use these probes but uncouple the lines?
Thanks
What probes can I use to monitor I2C at 100kHz? I have AUTOUTLET P6100 which came in a bundle with the 2204A from Amazon UK but they affect the clock line and stop the I2C working. Or is there a way to use these probes but uncouple the lines?
Thanks
Re: Probes for I2C
Do you have a photo of houw you have connected them.
they should work without problems. Unless you have some floating ground on the board.
You need to connect both black crocodile clips the the ground of the I2C signal.
Benno
they should work without problems. Unless you have some floating ground on the board.
You need to connect both black crocodile clips the the ground of the I2C signal.
Benno