Correct probes CM3

Which product is right for your exact requirements
Post Reply
edwardt
User
User
Posts: 2
Joined: Thu Jan 06, 2022 11:52 am

Correct probes CM3

Post by edwardt »

Hi,
Looking to purchase the CM3 but will need to log higher currents than the 200a clamps available as part of a package.
Could anyone confirm the following probes are compatible with the use of bmc to 4mm banana plugs

https://www.picotech.com/accessories/cu ... -probe-bnc

Many thanks

Tim

edwardt
User
User
Posts: 2
Joined: Thu Jan 06, 2022 11:52 am

Re: Correct probes CM3

Post by edwardt »

Is anyone from Pico able to reply?

Martyn
Site Admin
Site Admin
Posts: 4491
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Correct probes CM3

Post by Martyn »

The voltage output from these is too high for the input of the CM3
Martyn
Technical Support Manager

GeorgeIII
Newbie
Posts: 1
Joined: Mon Mar 06, 2023 9:06 am

Re: Correct probes CM3

Post by GeorgeIII »

I would also like to use higher current rating probes and with a bigger diameter. I found these on the RS website. On the datasheet, it says that the output on 1000v setting is also 1mV/A. Would you recommend the use of these?
https://za.rs-online.com/web/p/clamp-meters/1233224

Regards
George

Post Reply