Is there the area where eeprom can read/write the information?

Having problems ? let us know the details here
Post Reply
yasu
User
User
Posts: 3
Joined: Fri Jun 11, 2021 3:41 am

Is there the area where eeprom can read/write the information?

Post by yasu »

Hi

I use PT-104 for logging the output voltage of DC Signal Converter of thermocouple.
The Voltage value is directly received pc side form pt-104 through the Ethernet port.
and corrected using the our calibration information.
I'd like to save the information to eeprom on PT-104.
Is there the area where eeprom can read/write the information?

Regards,
yasu

Gerry
PICO STAFF
PICO STAFF
Posts: 1145
Joined: Mon Aug 11, 2014 11:14 am

Re: Is there the area where eeprom can read/write the information?

Post by Gerry »

Hi yasu,

I have edited this post.

The ability to write information to our hardware is not something that is available for customers or Calibration Labs.

Regards,

Gerry
Gerry
Technical Specialist

Gerry
PICO STAFF
PICO STAFF
Posts: 1145
Joined: Mon Aug 11, 2014 11:14 am

Re: Is there the area where eeprom can read/write the information?

Post by Gerry »

Hi Yasu,

Sorry, I forgot to add that you can scale the data from the signal converter in PicoLog 6. Just go to the Channel, and then select 'Advanced Options', click in 'Probe or Scaling', the select the method that you would like to use (equation or table) and then enter the equation for the x and y axis as y=mx+c where m is the scaling factor and C is the offset, or enter the Table as 2 columns of values, where the first column is the measured value, the second column is the value that it needs to be converted to, and the return units are the applicable to the sensor type, i.e. °C.

Regards,

Gerry
Gerry
Technical Specialist

Post Reply