TC-08 thermocouple type mistake in Picolog 6

Post any questions you may have about our current range of USB data loggers
Post Reply
fsiuser
Newbie
Posts: 0
Joined: Mon May 31, 2021 2:48 pm

TC-08 thermocouple type mistake in Picolog 6

Post by fsiuser »

Hi,

I collected temperature readings in Picolog 6 software using Type K thermocouples in TC-08.
However, the channels were set up mistakenly as Type J thermocouple. Picolog 6 doesn't allow to change this parameter after data acquisition. Is it possible to manipulate temperature data so that it reflects that of a Type K thermocouple?

Thanks

Post Reply