ID CAN decoding in DEC

Forum for discussing PicoScope version 6 (non-automotive version)
Post Reply
amem00
Newbie
Posts: 0
Joined: Tue May 18, 2021 8:20 am

ID CAN decoding in DEC

Post by amem00 »

Hi,
I'm using a picoscope 2205A MSO with software version 6.14.44 for decoding a CAN communication bus.
During the decoding, I noticed that when you change the ID CAN display format from HEX to DEC, the conversion is not correct. For example if ID CAN is 580 in HEX, it is displayed 5 128 in DEC instead of 1408. It seems that only the LSB is taken in account.
Regards

Post Reply