PICO6403E obtain Data usingC#

Forum for discussing PicoScope version 6 (non-automotive version)
Post Reply
77loveQL717
Newbie
Posts: 0
Joined: Sat May 08, 2021 12:59 am

PICO6403E obtain Data usingC#

Post by 77loveQL717 »

thanks for reading !
I am using 6403E to design a data collection program. The requirement is to collect 4000 data within 5us each time, loop multiple times. Which sampling mode should I use?
I used the Block mode before I read the picoscope-6000-series-a-api-programmers-guide. it saids" In normal block mode, the PicoScope 6000E Series scopes collect one waveform at a time. " "Rapid block mode allows you to sample several waveforms at a time with the minimum time between waveforms. It reduces the gap from milliseconds to less than 1 microsecond."
I have another question that I can't find the API GetValuesBulk and other api in ps6000a example master,how can i use it

Post Reply