Temperature Logging with ADC-100

Which product is right for your exact requirements
Post Reply
Guest

Temperature Logging with ADC-100

Post by Guest »

Hi,

We already own an ADC-100 and want to use it to log temperatures in the range of of -4F to +40F (-20C to +4C). Desired accuracy is +/1 1C.

What would be the least costly way to do this with an ADC-100?

Thanks in advance.

LM Polsky

User avatar
markspencer
Site Admin
Site Admin
Posts: 598
Joined: Wed May 07, 2003 9:45 am

Post by markspencer »

Hi,

To use the ADC-100 to measure temperature you would need to aquire a signal conditioner that can measure the temperature and then convert this into a voltage reading, so that the ADC-100 can then pass the value to the PC. Once the voltage is in the software it would then have to be scaled back to the temperature reading.

Unfortunately, we do not sell signal conditioners that can do this, you may be able to source one from either of these:

www.farnell.com
www.rswww.com

Best regards,
Regards,

Mark Spencer

Post Reply