Is it possible to change the voltage range in picoscope?

Having problems ? let us know the details here
Post Reply
edogawa1994
Newbie
Posts: 1
Joined: Mon Feb 08, 2021 6:12 am

Is it possible to change the voltage range in picoscope?

Post by edogawa1994 »

I am currently creating the interface program for picoscope with Labview. Based on the picoscope manual book, it says that I can create some voltage range by specifying some value from 3 to 10. I attached the table here as well. My question is if it possible to create a voltage range between 200 and 500 mV (like 300 mV)?
Because when I tried to access the function in labview, it led me to a dll files.

Thank you very much.
Attachments
image_2021-02-09_130928.png

AndrewA
PICO STAFF
PICO STAFF
Posts: 299
Joined: Tue Oct 21, 2014 3:07 pm

Re: Is it possible to change the voltage range in picoscope?

Post by AndrewA »

Hi,
We have LabVIEW software examples are available from our GitHub repositories see-
https://github.com/picotech/picosdk-ni-labview-examples
Note examples for 32-bit and 64-bit version of LabVIEW.
Follow the instructions here-
https://github.com/picotech/picosdk-ni- ... /README.md
Regards Andrew
Technical Specialist

Post Reply