PicoLog 6.1.18 Display Issues After Export

Forum for discussing PicoLog
Post Reply
GGGGGGG
Newbie
Posts: 0
Joined: Wed Feb 03, 2021 1:39 pm

PicoLog 6.1.18 Display Issues After Export

Post by GGGGGGG »

Hello, I'm using a 1216 with PicoLog 6.1.18. I have 10 sensors connected via the small terminal board. I set PicoLog to record data and I use the displayed readings for real-time monitoring. When I export data to .csv, the data is exported correctly, but the display now shows the channels shifted over i.e. the channel readouts do not correspond to the correct devices connected to each channel. This problem is repeatable and occurred in the previous version of PicoLog as well. The only fix is to close PicoLog, restart the computer, then unplug and plug in the 1216. Is there a fix in the works? I can provide screenshots later today. Thank you.

Post Reply