Ask the question of "window trigger"

Forum for discussing PicoScope version 6 (non-automotive version)
Post Reply
oasis2016
User
User
Posts: 2
Joined: Fri Jan 06, 2017 4:06 am

Ask the question of "window trigger"

Post by oasis2016 »

Hello, everyone!
I found a problem when using the demo function of Picoscope 6. When I use "window trigger" a 1KHz 800mVpp signal, the waveform cannot be stabilized at a certain point.
I mean, where is the trigger point for this kind of window? What is the scope of this so-called "window" on the time axis?
Because I am a beginner, please forgive my ignorance.
Thank you all!
I wish you a good mood every day!
Attachments
Windows_Trigger_70.jpg
20210117-0002.psdata
(4.88 MiB) Downloaded 28 times
Last edited by oasis2016 on Tue Jan 19, 2021 2:09 pm, edited 1 time in total.

Martyn
Site Admin
Site Admin
Posts: 3958
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Ask the question of "window trigger"

Post by Martyn »

That is a fault with the demo device driver which hasn't been touched for a long time. These are with a real scope
Attachments
20210118-0001.psdata
(392.47 KiB) Downloaded 27 times
Screenshot 2021-01-18 101210.png
Martyn
Technical Support Manager

oasis2016
User
User
Posts: 2
Joined: Fri Jan 06, 2017 4:06 am

Re: Ask the question of "window trigger"

Post by oasis2016 »

:D
Yes, I also think it is a problem with the DEMO mode.And I have seen the truth in the operation video you provided.

Thank you Martyn! :lol:

Post Reply