PicoScope 7 Software
Available on Windows, Mac and Linux
Channel B not working
Channel B not working
Hi,
I have just started working with a new Picoscope 2205A.
However the Channel B is not working. in Views/Channels/ only channel A is listed.
Do i need to configure somewhere specific ?
My configuration is the following:
PicoScope® 6 - PC Oscilloscope software version: 6.14.23.5207
Model: PicoScope 2205A
Serial Number: IT834/172
USB Version: 2,0
Calibration Date: mercredi 28 octobre 2020
Hardware Version: 17
Driver Version: 3.0.40.2131
Thanks.
Arnaud
I have just started working with a new Picoscope 2205A.
However the Channel B is not working. in Views/Channels/ only channel A is listed.
Do i need to configure somewhere specific ?
My configuration is the following:
PicoScope® 6 - PC Oscilloscope software version: 6.14.23.5207
Model: PicoScope 2205A
Serial Number: IT834/172
USB Version: 2,0
Calibration Date: mercredi 28 octobre 2020
Hardware Version: 17
Driver Version: 3.0.40.2131
Thanks.
Arnaud
Re: Channel B not working
By default only Channel A is enabled.
On the top bar you will see it says Auto next to the A, and Off next to the B, select the drop down and enable B.
On the top bar you will see it says Auto next to the A, and Off next to the B, select the drop down and enable B.
Martyn
Technical Support Manager
Technical Support Manager