Channel B not working

Forum for discussing PicoScope version 6 (non-automotive version)
Post Reply
Posts: 0
Joined: Sat Jan 02, 2021 1:03 pm

Channel B not working

Post by arnaud86 »

I have just started working with a new Picoscope 2205A.
However the Channel B is not working. in Views/Channels/ only channel A is listed.

Do i need to configure somewhere specific ?

My configuration is the following:
PicoScope® 6 - PC Oscilloscope software version:
Model: PicoScope 2205A
Serial Number: IT834/172
USB Version: 2,0
Calibration Date: mercredi 28 octobre 2020
Hardware Version: 17
Driver Version:


Site Admin
Site Admin
Posts: 3958
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Channel B not working

Post by Martyn »

By default only Channel A is enabled.

On the top bar you will see it says Auto next to the A, and Off next to the B, select the drop down and enable B.
Technical Support Manager

Post Reply