Hello,
I recently bought an ADC-20 and ADC-24 Precision Data Logger for measuring the voltage generated from a microbial fuel cell. My friend helped me to connect it to a Raspberry pi and it worked well and I was taking the reading for my last experiment study. However, this is not happening now. There is no record button I can see on the screen and also there is no real-time plot.
If you can inform me the instructions to solve this problem, I would be greatly appreciated it.
Thanking you
Haris Nalakath
ADC-20 and ADC-24 Precision Data Loggers
ADC-20 and ADC-24 Precision Data Loggers
- Attachments
-
-
Re: ADC-20 and ADC-24 Precision Data Loggers
When you did the first capture it was setup as Fixed Length and Stop after Capture.
What you need to do is press the Reset button on the top bar, select delete data, and then you will be able to restart the recording.
What you need to do is press the Reset button on the top bar, select delete data, and then you will be able to restart the recording.
Martyn
Technical Support Manager
Technical Support Manager
Re: ADC-20 and ADC-24 Precision Data Loggers
Thanks. It works