Digital Video Measurement

Which product is right for your exact requirements
Post Reply
MMaster
User
User
Posts: 2
Joined: Sat Dec 19, 2020 3:19 pm

Digital Video Measurement

Post by MMaster »

Dear Community,
I want to measure Digital Video Signals with a Pico Scope. I don't know which product is suitable?

My Problem is following. I use a HD Camera with an HD-SDI Output. The Output is Compliant with SMPTE 274M and SMPTE 296M.
Then the output is connected to a coaxial Cable with 100m. After this cable then a reciever Box is connected.
Now I want to verify the Signal over the cable. Further I want to measure the cable attenuation and compare the Input and Output Signal.
In the future I want to increase the length of the cable and put two Slip Rings into the cable. I want to find out how long I can make the Distance between Camera and the Reciever Box.

Gerry
PICO STAFF
PICO STAFF
Posts: 1145
Joined: Mon Aug 11, 2014 11:14 am

Re: Digital Video Measurement

Post by Gerry »

Hi MMaster,

I apologise for the delay in answering (this post got overlooked in the run up to Christmas).

If you are still looking to do this, then I would suggest sending an email into support@picotech.com and marking it for the attention of the RF team.

Regards,

Gerry
Gerry
Technical Specialist

MMaster
User
User
Posts: 2
Joined: Sat Dec 19, 2020 3:19 pm

Re: Digital Video Measurement

Post by MMaster »

E-Mail ist sent.

Post Reply