How to correct for input offset with Picolog v6.1.16 and Picoscope 2207BMSO?

Forum for discussing PicoLog
Post Reply
heymanrl
Newbie
Posts: 0
Joined: Sat Aug 01, 2020 9:12 pm

How to correct for input offset with Picolog v6.1.16 and Picoscope 2207BMSO?

Post by heymanrl »

I am using Picolog v6.1.16 with a Picoscope 2207BMSO. The picoscope has a large input offset I can correct for using the "zero channel offsets". However, when I connect picolog to the picoscope, the original channel offsets exist. What is the correct way, using picolog and picoscope, to correct for the input channel offsets?

I have tried using the math function to add or subtract a constant to the recorded values. While that does work, I can't believe that is the correct way to remove the offsets using picolog.
Top
Gerry
PICO STAFF
PICO STAFF
Posts: 1145
Joined: Mon Aug 11, 2014 11:14 am

Re: How to correct for input offset with Picolog v6.1.16 and Picoscope 2207BMSO?

Post by Gerry »

Hi Richard,

I have modified this post as there is the possibility to make the change in PicoLog 6, and I'll create an enhancement request for this feature.

Regards,

Gerry
Gerry
Technical Specialist
Top
Post Reply

Return to “PicoLog”