I have a Windows 7 64 Bit, a PicoScope 2206 B MSO and Matlab 2020a 64 Bit and MATLAB and Simulink Student Suite which includes the Instrument Control Toolbox.
The installation was done inline with https://www.youtube.com/watch?v=zpMIRnvylTk, the tutorial from Neil.
The picoscope 6 software is running fine.
I have executed Matlab both - with Picoscope 6 SW running and stopped
I got the icdevice connect fail as shown in the attached screenshot.
Do you have an advice for me how to get the connection with matlab running.
I have not found the error with the requested midedit.
The picoscope driver is the 1.1.22 as shown in midedit.
Thank you very much in advance
Best regards,
Stephan
The scope can only be connected in a single instance so if you have PicoScope 6 connected to the scope, even if it isn't running currently, then MATLAB will be unable to find the device to use.
I've just spotted that you're using the ps2000 examples, which will not work with your 2206B MSO.
Your scope needs the ps2000a instrument driver addon and examples to work in MATLAB.