PicoScope 7 Software
Available on Windows, Mac and Linux
Saving channel signals automatically
Saving channel signals automatically
Dear All!
Now I am testing a monochromator, giving approx 1kHz square signals continuously in both CH1 and CH2, after an initial cca 90 sec inactive (self test) period. Both signals are 5V.
How can I save the very beginning of the signal stream automatically to jpeg files?
It would be also good, if I can set a threshold (say 1..2 volt) as a starting signal for the saving process.
Thanks
Peter
Now I am testing a monochromator, giving approx 1kHz square signals continuously in both CH1 and CH2, after an initial cca 90 sec inactive (self test) period. Both signals are 5V.
How can I save the very beginning of the signal stream automatically to jpeg files?
It would be also good, if I can set a threshold (say 1..2 volt) as a starting signal for the saving process.
Thanks
Peter
Re: Saving channel signals automatically
Sorry for the slow reply due to the current situation.
What device do you have and what software are you are using ?
What device do you have and what software are you are using ?
Martyn
Technical Support Manager
Technical Support Manager