PicoScope 7 Software
Available on Windows, Mac and Linux
2205A no DC
-
grahamwebb2000
- Newbie
- Posts: 0
- Joined: Mon Nov 01, 2010 2:15 pm
2205A no DC
Hi, My 2205A is no longer measuring DC signals. Any thoughts?
Thanks
Thanks
Re: 2205A no DC
Does this happen on both channels ? Do you here a relay click when you switch between DC and AC coupling, or when you switch from high range to low range ?
It's possible that there is a hardware fault that is leaving the DC blocking capacitor switched in circuit. I would suggest emailing support@picotech.com and they can check this through with you and advise on repair procedures if necessary.
It's possible that there is a hardware fault that is leaving the DC blocking capacitor switched in circuit. I would suggest emailing support@picotech.com and they can check this through with you and advise on repair procedures if necessary.
Martyn
Technical Support Manager
Technical Support Manager