Will PicoScope 7 interface make it's way to non-automotive ?

Post general discussions on using our drivers to write your own software here
Post Reply
nurber
User
User
Posts: 7
Joined: Fri Mar 24, 2017 6:05 pm

Will PicoScope 7 interface make it's way to non-automotive ?

Post by nurber » Thu Apr 09, 2020 7:28 pm

Will we see this interface and the possible advantages ( excluding the features specific to automotive scope ) for non-automotive scope ? Lot's of basic features discussed on this forum for years that didn't seem to be addressed that I might feel better about knowing that a new interface is on the way.

Sven

NeilH
PICO STAFF
PICO STAFF
Posts: 180
Joined: Tue Jul 18, 2017 8:28 am

Re: Will PicoScope 7 interface make it's way to non-automotive ?

Post by NeilH » Tue Apr 14, 2020 6:58 am

Hi Sven

PicoScope 7 will be having a T&M release in the future for non automotive applications

Neil
Neil
Technical Support Engineer

nagesh
Newbie
Posts: 0
Joined: Sun Apr 26, 2020 7:49 am

Re: Will PicoScope 7 interface make it's way to non-automotive ?

Post by nagesh » Sun Apr 26, 2020 8:13 am

Hi,

when can we expect the Picoscope 7 software for non-automotive scopes? Picoscope 6 software seems to be lacking some very basic scope functions, such as labeling channels, ability to change Y-axis volts/division setting.

thanks.
Nagesh

NeilH
PICO STAFF
PICO STAFF
Posts: 180
Joined: Tue Jul 18, 2017 8:28 am

Re: Will PicoScope 7 interface make it's way to non-automotive ?

Post by NeilH » Tue Apr 28, 2020 2:15 pm

Hi

I have no information about when PicoScope 7 will be available for T&M

Neil
Neil
Technical Support Engineer

Post Reply