PicoScope 7 Software
Available on Windows, Mac and Linux
PS4262 Cannot enable BW Limit from Python?
-
JakeKarson
- Newbie
- Posts: 0
- Joined: Fri Mar 13, 2020 8:20 am
PS4262 Cannot enable BW Limit from Python?
Hi,
I have a 4262. My python test code is shown below. Setting BWLimited to True or False or 1/0 makes no difference to the capture. The capture has no BW limiting. If I use the Picoscope 6 software BW Limit makes the expected difference in rolling off the spectrum above 200Khz.
I'm have anaconda2 install and py version is 2.7.14. I don't see any version strings in the pico code but it was installed about 6 months ago.
Thanks,
I have a 4262. My python test code is shown below. Setting BWLimited to True or False or 1/0 makes no difference to the capture. The capture has no BW limiting. If I use the Picoscope 6 software BW Limit makes the expected difference in rolling off the spectrum above 200Khz.
I'm have anaconda2 install and py version is 2.7.14. I don't see any version strings in the pico code but it was installed about 6 months ago.
Thanks,
Re: PS4262 Cannot enable BW Limit from Python?
Hi
Are you able to post a code snippet showing exactly how you're current calling the ps4000SetBwFilter function in python
Neil
Are you able to post a code snippet showing exactly how you're current calling the ps4000SetBwFilter function in python
Neil
Neil
Technical Support Engineer
Technical Support Engineer