Temperature rate of change

Forum for discussing PicoLog
Post Reply
kemosabian
Newbie
Posts: 0
Joined: Mon Feb 17, 2020 10:15 am

Temperature rate of change

Post by kemosabian » Mon Feb 17, 2020 10:26 am

We are using a TC-08 and Picolog 6 software to test the temperature rise of our system. We are interested in the point where the system reaches thermal equilibrium and the temperature readings all plateau.

The standards we apply to our equipment design define the equilibrium point as a rate of change of less than 1C/hour.

I had hoped that we could use the math channel to perform a derivative function with respect to time but this doesn't appear to be possible.

Is it? And if so how is it achieved?

Thanks in advance!

NeilH
PICO STAFF
PICO STAFF
Posts: 180
Joined: Tue Jul 18, 2017 8:28 am

Re: Temperature rate of change

Post by NeilH » Wed Feb 19, 2020 10:32 am

Hi

There is currently not an option in the maths channels of PicoLog 6 to do derivative on data.
I have raised this feature request with our development team

Neil
Neil
Technical Support Engineer

Post Reply