PicoScope 7 Software
Available on Windows, Mac and Linux
Help on a project
Help on a project
Hi,
What I would like to be able to do is record the signals coming into an RGB 3.3v led, which would include voltage, duty cycles, phase etc for each colour red, green and blue.
I would then like to be able to generate some form of playback file from an arduino that could output a pwm signal to replicate the original logging and drive the same RGB led.
Any help appreciated on this - willing to pay for someone to help me if it's a custom job.
Many thanks
Craig
What I would like to be able to do is record the signals coming into an RGB 3.3v led, which would include voltage, duty cycles, phase etc for each colour red, green and blue.
I would then like to be able to generate some form of playback file from an arduino that could output a pwm signal to replicate the original logging and drive the same RGB led.
Any help appreciated on this - willing to pay for someone to help me if it's a custom job.
Many thanks
Craig
Re: Help on a project
can you tel what kind of 3.3V RGB signal
there are a lot of libraries that can do most known RGB signals to leds.
Benno
there are a lot of libraries that can do most known RGB signals to leds.
Benno