Enviromon has been updated with extra features, this includes:
New monitor view,
Deviation alarms,
Archiving, save/load ini files
Improved graph panning.
To make use of the latest software you need to update your Enviromon Logger by running logload.exe. This can be found in your enviromon folder, by default in
Since I follow LogLoad instructions.pdf with SUCCESS it does not works serial communication with EL-005. So can I roll back this procedure OR have any suggestions about this situation ?
before the logload stuff and the older software, the PC would sometimes not talk to the logger but was generally ok. i downloaded newer software and carried out logload successfully. now when i try to load settings it comes back with 'logger not found on com port ...' i have tried all available com ports and received same message. the initial reason for updating software was an error uploading settings 'unable to update time' but cant even get this far now.
Hi this is a bit strange since in all the attempts I have had I have had no problems. However we need to get to the roots of you problem. You say logger not found. Have you programmed the unit again or not?
yes i have run the logload successfully. would there be a problem with using a usb port with converter rather than a rs232 port as suggested? as this is what i am now doing. new laptop does not have rs232 port.
Changed laptop from xp to windows 7, set the comms port to COM,1 downloaded latest version of the software, ran the logload and keep getting a fail to communicate message on the software and logload, Any ideas.