Test and Measurement Forum

Copectrumllecting and Displaying S

Having problems ? let us know the details here

Copectrumllecting and Displaying S

Postby Jasper » Sat May 17, 2008 9:13 am

I am looking to collect and display 2 vibration spectrums / ffts at the same time.

i am using standard vibration sensors (100 mv/g) output from Monitran

i have a picolog adc 11, can i use this or do i need a picoscope


Jasper :(
Active User
Active User
Posts: 6
Joined: Mon Mar 17, 2008 9:27 pm

Postby picojohn » Mon May 19, 2008 10:16 am

Hello Jasper,

Using the ADC-11 will yield a maximum frequency range of 5 Khz for unipolar signals only (0 to 2.5 V).

For vibration work, customers typically choose a 12-bit PicoScope (http://www.picotech.com/picoscope3000.html).

In choosing which product is most suited to your requirement, you may wish to consider the required vertical resolution and spectrum range.

Zen Master
Zen Master
Posts: 382
Joined: Mon Jun 11, 2007 1:10 pm

Return to Getting Started

Who is online

Users browsing this forum: No registered users and 0 guests