Decoding data captured by Picolog

Forum for discussing PicoLog
Post Reply
Yarash
Newbie
Posts: 0
Joined: Wed Jan 29, 2020 5:52 am

Decoding data captured by Picolog

Post by Yarash » Wed Jan 29, 2020 5:55 am

Hi

Is there any way to decode serial data captured by Picolog?

Or, what is the best way to capture a long stream of serial data?


Thanks.

Gerry
PICO STAFF
PICO STAFF
Posts: 594
Joined: Mon Aug 11, 2014 11:14 am

Re: Decoding data captured by Picolog

Post by Gerry » Wed Jan 29, 2020 6:01 pm

Hi Yarash,

You can only decode Serial data automatically using our PicoScope 6 software. If your data acquisition device is not a PicoScope or if you can't capture enough data for your requirement, then you would need to either use our Software Development Kit to develop your own decoding application, or export the data and use some form of third party decoding tool.

Regards,

Gerry
Gerry
Technical Specialist

Post Reply