Missing TA133 among the embedded probes

Forum for discussing PicoScope version 6 (non-automotive version)
Post Reply
ViMo
Newbie
Posts: 0
Joined: Wed Dec 18, 2019 3:49 pm

Missing TA133 among the embedded probes

Post by ViMo »

Hello everyone,
I've unboxed my 6404D. The unit is provided with 4 x TA133 probes. Unfortunately these probes are not listed even in the most recent version of the Picoscope Software. Are there anything special I must consider when
creating my customized probe for this?
May be you can provide the probe definition for being imported into the software?

Thank you in advance

Martyn
Site Admin
Site Admin
Posts: 4491
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Missing TA133 among the embedded probes

Post by Martyn »

The TA133 is a simple passive high bandwidth x10 probe so all you need to do is select x10 in the probe dropdown.
Martyn
Technical Support Manager

ViMo
Newbie
Posts: 0
Joined: Wed Dec 18, 2019 3:49 pm

Re: Missing TA133 among the embedded probes

Post by ViMo »

Thank you, this is exactly what I did. I've simply thought, there are some additional tweaks I should apply for better results. Without any additional information it's hard to guess.

Post Reply