is it possible to use a Picoscope Oscilloscope as a Measurement device with Labview. I have seen, that there is a possibility of using them with Labview. But can they output the analog voltage, that they measure to other VIs? I need a Measurement device with a sampling rate of at least 3MS/s in Order to receive the Counts of a Servo-Motor-Encoder.
I hope someone can help me.
If you have any other suggestions on how to solve this, I would be very greatful.
Thanks in advance.
Post any questions you may have about our current range of oscilloscopes
1 post • Page 1 of 1