PicoScope 2203, & PicoLog on Raspi 3B+ ?

Forum for discussing PicoLog
Post Reply
James007
Newbie
Posts: 0
Joined: Wed Nov 27, 2019 11:08 am

PicoScope 2203, & PicoLog on Raspi 3B+ ?

Post by James007 » Fri Nov 29, 2019 6:55 pm

Hi, being a Linux newbie I tried to get picolog set up on my Pi. Installation of picolog worked weel w/o issues.
However it doesn't start when clicking PicoLog under accessories. So I though I might need a driver !?
Tried to install drivers but wasn't succesful at all. Downloaded Always got stuck at "./autogen.sh" - command not found. I am looking for a comprehensive description to get this installed. Would be happy to get some support as I bought he Pi solely for the PicoLog...
Thanks a lot folks
Top
Martyn
Site Admin
Site Admin
Posts: 3799
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: PicoScope 2203, & PicoLog on Raspi 3B+ ?

Post by Martyn » Mon Dec 02, 2019 5:55 am

The PicoScope 2203 is an old model and not supported by the cross platform PicoLog 6, it will only work with PicoLog 5 which is for Windows only. Sorry.
Martyn
Technical Support Manager
Top
James007
Newbie
Posts: 0
Joined: Wed Nov 27, 2019 11:08 am

Re: PicoScope 2203, & PicoLog on Raspi 3B+ ?

Post by James007 » Mon Dec 02, 2019 9:04 am

Thanks for clarification Martyn
Top
MapleMan
Newbie
Posts: 1
Joined: Mon Jan 27, 2020 1:55 am

Re: PicoScope 2203, & PicoLog on Raspi 3B+ ?

Post by MapleMan » Mon Jan 27, 2020 8:16 pm

This is the same issue that I'm having here.

In James' case the 2203 is not compatible with the Pi, but that doesn't solve the issue of the PicoLog software not even launching in the first place?
Top
Post Reply

Return to “PicoLog”