Readability of screen information and customer feedback

Post any questions you may have about our current range of oscilloscopes
Post Reply
Phil_S
Newbie
Posts: 0
Joined: Mon Nov 30, 2015 10:49 am

Readability of screen information and customer feedback

Post by Phil_S » Thu Oct 24, 2019 1:15 pm

Hello
Despite have the Pico Scope software displayed on a 22" HD monitor, I still struggle to read the measurement values at the bottom of the page. The first line, on mine at least, is white characters on a dark background and I find it impossible to see decimal points.
Subsequent lines of dark characters on a white background is easier to read, Why not make them all the same?
I tried to raise this through the "Feedback" on the Help tab but all I got was something along the lines of "no internet connection", patently not correct

Martyn
Site Admin
Site Admin
Posts: 3755
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Readability of screen information and customer feedback

Post by Martyn » Fri Oct 25, 2019 6:28 am

Two things to help :-)

Firstly if you select the Measurements menu at the top you can change the font size which will help with readability.
Secondly if you hold down the control key and click on the highlighted measurements, the highlight will be removed
Martyn
Technical Support Manager

Post Reply