Is there a plan to support 100BASE-T1 automotive ethernet?

Which product is right for your exact requirements
Post Reply
Markro6974
User
User
Posts: 2
Joined: Thu Aug 15, 2019 4:36 am

Is there a plan to support 100BASE-T1 automotive ethernet?

Post by Markro6974 »

I can see you support 100BASE-Tx decoding, but wondered about T1 seeing as the speed is same and it uses 2 wire differential UTP so nothing too elaborate for capture.

If so, what bandwidth choice would I need?
Top
Martyn
Site Admin
Site Admin
Posts: 4499
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Is there a plan to support 100BASE-T1 automotive ethernet?

Post by Martyn »

From the latest news page of our website
100BASE-T1/BroadR-Reach is destined to become the physical layer standard for high-performance automotive applications. It uses PAM3 signaling on a differential twisted pair, which can be impossible to monitor without affecting the signal. Pico is about to introduce the industry’s first non-intrusive full duplex automotive Ethernet decoder, .....
I suggest that you email support@picotech.com to discuss this in more detail.
Martyn
Technical Support Manager
Top
Post Reply

Return to “Pre-Sales Advice”