Measurement

Post discussions on applications you are writing
Post Reply
Leo
User
User
Posts: 4
Joined: Wed Dec 19, 2018 2:18 am

Measurement

Post by Leo »

Dear all,

The device model I am using is Picoscope 6403C.I have some problems to be solved.

1.When I connect nothing to the probe,there are about 19-31mV background noises.

2.When I use four channels simultaneously with no-load measurements,there are large deviations in the measurement results of the four channels.

3.When I use four channels to measure a known sine wave simultaneously,there are also large deviations in the measurement results of the four channels.

I have attached some screen captures of these events.

Any ideas?

Regards,

Leo.
Attachments
no-load measurements
no-load measurements
sine wave measurement
sine wave measurement

Martyn
Site Admin
Site Admin
Posts: 4491
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Measurement

Post by Martyn »

Sorry for the delay in answering, if this is still an issue please email support@picotech.com with the psdata files.
Martyn
Technical Support Manager

Post Reply