Peak current measurement

Post discussions on projects you are working on
Post Reply
Posts: 0
Joined: Thu Jul 25, 2019 12:13 pm

Peak current measurement

Post by 19andre79 »

Hi, first my English is not very good, please excuse any mistakes. I tried to measure the peak current on a 24VDC linear drive.
I used the oscilloscope 2405A together with the current clamp TA018. As a result, I have always received 23A peak. No matter if the drive was loaded or not. The peak current I expect but would have to be much higher. Is the equipment suitable for such a measurement?
Thank you very much for your effort!

Advanced User
Advanced User
Posts: 70
Joined: Mon Nov 26, 2012 9:16 am
Location: Netherlands

Re: Peak current measurement

Post by bennog »

Do you have the switch on the high current position ?

Post Reply