Test and Measurement Forum

Driver

Forum for discussing PicoScope (version 5)

Driver

Postby Guest » Sat Apr 26, 2008 3:02 pm

I have an ADC-212 and want to use its driver to gather data for my own program. Can that be done? (By the way, I can't log on and can't find a way to get help with logging on without first logging on.)
Guest
 

Postby picojohn » Mon Apr 28, 2008 9:45 am

Hello Guest,

If you wish to write your own application software, you may refer to the programming examples provided as follows:

During software installation when prompted for 'setup type' select 'Custom' and ensure that 'programming examples' are installed by removing the red cross. The example programmes will be installed on the root drive in the following directory: C:/Program Files/Pico Technology/Pico Full/Examples

You will also find programming support for various languages in the user manual (http://www.picotech.com/document/pdf/adc2xx.pdf), along with an explanation of the API routines for the unit.

Regards
John
picojohn
Zen Master
Zen Master
 
Posts: 382
Joined: Mon Jun 11, 2007 1:10 pm

Driver

Postby Guest » Mon Apr 28, 2008 3:27 pm

I did that but there are no programming examples for the ADC212. There are for the ADC200--are those applicable to any ADC2xx?
Guest
 

Postby picojohn » Tue Apr 29, 2008 10:31 am

Hello Guest,

Those are applicable to any ADC2xx

Regards
John
picojohn
Zen Master
Zen Master
 
Posts: 382
Joined: Mon Jun 11, 2007 1:10 pm


Return to PicoScope 5

Who is online

Users browsing this forum: No registered users and 0 guests