PicoScope 7 Software
Available on Windows, Mac and Linux
Trigger on EXT port
-
haziqsahaja
- Newbie
- Posts: 1
- Joined: Mon Jul 15, 2019 7:45 am
Trigger on EXT port
Hi, i have problem on setting trigger using EXT port. im using picoscope 3000 and 5000 series. the reason is i want to trigger channel A using EXT port because want to maintain the sampling rate. if im using the current channel for example CHannel A and B and trigger the Channel B from A, the sampling rate is decreased. so thats why im trying to use EXT port. but the signal doesnt capture and triggered. can someone help me to solve this problem.
Thanks.
Thanks.
Re: Trigger on EXT port
Hi haziqsahaja,
Could you tell us exactly which model 3000 and 5000 PicoScopes you have, and could you post your psdata file so that we can see how you have thing set up.
The sample rate of the channels shouldn't normally be affected by what channel you trigger from. If you could also explain in more detail what you are trying to achieve, we will be able to help you.
Regards,
Gerry
Could you tell us exactly which model 3000 and 5000 PicoScopes you have, and could you post your psdata file so that we can see how you have thing set up.
The sample rate of the channels shouldn't normally be affected by what channel you trigger from. If you could also explain in more detail what you are trying to achieve, we will be able to help you.
Regards,
Gerry
Gerry
Technical Specialist
Technical Specialist