PicoScope 7 Software
Available on Windows, Mac and Linux
How to set sampling rate to 50MSPS with SDK
How to set sampling rate to 50MSPS with SDK
Hi, I'm new to PicoTech Scope.
I'd like to start with an project for sampling input signal at 50MSPS.
I have checked the API Guide, and found that the notion of 'Timebases' is what I need. However, according to the guide, I can only set the Sampling Interval as 1, 2, 4, 8, 16, 32ns ..., which I can NOT set it as 20 ns which means 50MSPS.
I found I can set the sampling rate as 50MSPS with the software PicoScope 6 which is showed in the attached image.
So, my question is, how to set the sampling as 50MSPS with SDK?
Thanks!
I'd like to start with an project for sampling input signal at 50MSPS.
I have checked the API Guide, and found that the notion of 'Timebases' is what I need. However, according to the guide, I can only set the Sampling Interval as 1, 2, 4, 8, 16, 32ns ..., which I can NOT set it as 20 ns which means 50MSPS.
I found I can set the sampling rate as 50MSPS with the software PicoScope 6 which is showed in the attached image.
So, my question is, how to set the sampling as 50MSPS with SDK?
Thanks!
- Attachments
-
Re: How to set sampling rate to 50MSPS with SDK
You can't set 50MS/s
In PicoScope the 50MS is the number of samples you would like to collect across the screen. If you select Views->View Properties you will get a panel on the right showing exactly how the scope is set up.
In PicoScope the 50MS is the number of samples you would like to collect across the screen. If you select Views->View Properties you will get a panel on the right showing exactly how the scope is set up.
Martyn
Technical Support Manager
Technical Support Manager
Re: How to set sampling rate to 50MSPS with SDK
I see. Thanks!