Problems with CAN

Having problems ? let us know the details here
Post Reply
Osborne
User
User
Posts: 6
Joined: Mon Apr 08, 2019 8:06 pm
Location: Sweden

Problems with CAN

Post by Osborne » Fri Jul 12, 2019 1:46 pm

I cannot visualize the hex numbers when decoding a message. I attach a pdf of my problem. I was running r6-11-12 on a PC windows 7 when captured but I tried also r6-13-15 with almost the same result. The hex area, below the actual wave, is to small and wrongly placed etc. What do I fail to do?
Attachments
Pico r6-11-12.pdf
(893.6 KiB) Downloaded 17 times
20190712-0001.psdata
(911.61 KiB) Downloaded 16 times

bennog
Advanced User
Advanced User
Posts: 58
Joined: Mon Nov 26, 2012 9:16 am
Location: Netherlands

Re: Problems with CAN

Post by bennog » Fri Jul 12, 2019 4:41 pm

You need to set the threshold and the Low can channel.
And 20k baud rate
2019-07-12_18-36-40.png
It is actually 19.8 kbaud

Benno

Osborne
User
User
Posts: 6
Joined: Mon Apr 08, 2019 8:06 pm
Location: Sweden

Re: Problems with CAN

Post by Osborne » Fri Jul 12, 2019 5:18 pm

I did check the threshold to approx 203mv (x10 probe and it was done automatically) and I really thought I also tried LOW and positively 20 kbs, but your "hand" on the problem solved it. Thank you! :D

Post Reply