Record a time betwen two event with PicoScope 4424

Post any questions you may have about our current range of oscilloscopes
Post Reply
Francois_M
Newbie
Posts: 0
Joined: Wed Apr 24, 2019 9:42 am

Record a time betwen two event with PicoScope 4424

Post by Francois_M » Wed Apr 24, 2019 11:29 am

Hi

Before buy it, I would like to know if picoscope 4424 can register and export time. Exemple, I need to detect when i have 0 V on the CH1 probe and record the time. After that I do the same thing witch CH2 and I do the operation CH2 - CH1 to have my time measure. Time is in micro second and I need to have a precise measure. Do you think its possible ?

Thanks

Francois
Last edited by Francois_M on Thu Apr 25, 2019 12:58 pm, edited 1 time in total.

Gerry
PICO STAFF
PICO STAFF
Posts: 493
Joined: Mon Aug 11, 2014 11:14 am

Re: Record a time betwen two event with PicoScope 4424

Post by Gerry » Thu Apr 25, 2019 2:03 pm

Hi Francois,

Apologies for the mis-directed post.

Yes this is possible with the deep measure feature of our PicoScope 6 software (see here: https://www.picotech.com/library/oscill ... eepmeasure), which is available for the PicScope 4424.

Regards,

Gerry
Gerry
Technical Specialist

Post Reply