Picoscope 6.13.7.707 sometimes just stops responding

Discussion forum for the Picoscope 6 Linux software
Post Reply
dnessett
Active User
Active User
Posts: 39
Joined: Tue Oct 16, 2018 10:30 pm

Picoscope 6.13.7.707 sometimes just stops responding

Post by dnessett »

I have again experienced the Picoscope 6.13.7.707 beta software becoming non-responsive. I originally reported this behavior as a problem using a 100 Hz frequency span (see topic39790.html) and I later thought the problem was operator error (selected single triggering). But, now I experienced the same non-responsive behavior using a span of 10 KHz, so I am retracting my "mea culpa" and now believe there is a bug that causes this problem. Unfortunately, it appears to randomly occur and so I cannot provide a recipe to drive the software into a non-responsive state. The only way I found to get around the problem was to quit and restart Picoscope.

Dan
Top
Martyn
Site Admin
Site Admin
Posts: 4499
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Picoscope 6.13.7.707 sometimes just stops responding

Post by Martyn »

As we are working on a cross platform version of the software it is unlikely that we would be able to investigate this issue, particularly as it is difficult to reproduce.
Martyn
Technical Support Manager
Top
Post Reply

Return to “PicoScope 6 for Linux”