2204A integrated signal function/ no signal

Post any questions you may have about our current range of oscilloscopes
Post Reply
obeidax
Newbie
Posts: 0
Joined: Sat Apr 13, 2019 11:11 am

2204A integrated signal function/ no signal

Post by obeidax » Sat Apr 13, 2019 1:18 pm

Hi, i´m a student and i wanted to getting starting with oscilloscope so i bought the usb 2204A pc oscilloscope.
and as i wanted to use the integrated function generator nothing was to seen on the screen. it would be great if someone can tell me if i understood this thing wrong or if there is a problem with my device itself.

Martyn
Site Admin
Site Admin
Posts: 3709
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: 2204A integrated signal function/ no signal

Post by Martyn » Sat Apr 13, 2019 9:02 pm

Have you connected the signal generator output to either of the input channels?
Martyn
Technical Support Manager

obeidax
Newbie
Posts: 0
Joined: Sat Apr 13, 2019 11:11 am

Re: 2204A integrated signal function/ no signal

Post by obeidax » Sun Apr 14, 2019 9:53 am

Could you tell me please which kind of cable I need for this?
Thank you for helping 🙂

Martyn
Site Admin
Site Admin
Posts: 3709
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: 2204A integrated signal function/ no signal

Post by Martyn » Mon Apr 15, 2019 5:49 am

Either a BNC to BNC cable, or you can use an oscilloscope probe putting the BNC end onto channel A and the probe tip into the centre of the SigGen output connector.
Martyn
Technical Support Manager

Post Reply