error using runtime environment

Post your LabVIEW discussions here
Post Reply
mushroom
Newbie
Posts: 0
Joined: Wed Apr 10, 2019 5:02 am

error using runtime environment

Post by mushroom » Wed Apr 10, 2019 5:18 am

Hello,

I experienced a problem using the PicoScope 3000 series with the LabVIEW runtime environment. I created a VI for data acquisition which is working with the development environment quite well. Running the application compiled with the LabVIEW application builder on a computer with installed runtime environment, PicoScope drivers and additionally SDK gives me an error as shown in the attached picture. SubVI and DLL are included in the built application. I'm using LabVIEW2017.
Somebody has an idea where the problem could be?

x-post in german: https://www.labviewforum.de/Thread-Fehl ... EW-Runtime
Attachments
image001.png

Martyn
Site Admin
Site Admin
Posts: 3662
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: error using runtime environment

Post by Martyn » Thu Apr 18, 2019 8:52 am

Have you tried the compiled version on the development PC ?

If yes, can you send in your code to support@picotech.com and the team can take a look.
Martyn
Technical Support Manager

mushroom
Newbie
Posts: 0
Joined: Wed Apr 10, 2019 5:02 am

Re: error using runtime environment

Post by mushroom » Mon May 13, 2019 5:13 am

I tried the compiled version on a development PC where it was created and the program was working. On another PC with the development version I get the same error message as with the runtime environment. It seems that some files are missing in the compiled version. I will contact the support as you mentioned. Thanks.

mushroom
Newbie
Posts: 0
Joined: Wed Apr 10, 2019 5:02 am

Re: error using runtime environment

Post by mushroom » Fri May 17, 2019 1:42 pm

I found the error. The ps3000a.dll was not found because I put only the library name in the 'Call Library Function'. Replaced by a relative path on the diagram, which is working now.

Post Reply