Not seeing DeepMeasure in the Menu Bar

Forum for discussing PicoScope version 6 (non-automotive version)
Post Reply
jkelly
Newbie
Posts: 0
Joined: Wed Apr 03, 2019 7:52 pm

Not seeing DeepMeasure in the Menu Bar

Post by jkelly »

I am running Picoscope 6 V6.13 but can't find Deep Measure below the the Measurements tab on the menu bar.

Martyn
Site Admin
Site Admin
Posts: 4491
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Not seeing DeepMeasure in the Menu Bar

Post by Martyn »

Which device do you have ?

Deep Measure is not available with PicoScope 2000 series devices.
Martyn
Technical Support Manager

jkelly
Newbie
Posts: 0
Joined: Wed Apr 03, 2019 7:52 pm

Re: Not seeing DeepMeasure in the Menu Bar

Post by jkelly »

Thanks, I discovered that after I posted the question.
I have the 2406B.

Is this a hardware limitation on the 2000 series?

Ezib
Newbie
Posts: 0
Joined: Sun Jun 21, 2020 9:59 pm

Re: Not seeing DeepMeasure in the Menu Bar

Post by Ezib »

Hello!

Yesterday I was analysing some signals with my picoscope 2204A. After a lot of trying the different features of my picoscope (suddenly) I saw the analysis tool "deep measure" in the tool bar. (To be honest, I was a bit surprised, because I think it was not always there since the beginng of my work.).
But this feature helped me a lot and I was also able to do a CSV export of the data. :D

Now today, I wanted to go on with my work, but unfortunately the "deep measure" tool is not available any more. :( :(

Has anyone had the same experiance?
Or can anyone help me, to recover this deep measure tool?

Thank you!!!!

Post Reply